Scale Calibration (load cell)
Each point saves the live millivolt signal at a known weight. The scale must be STABLE. Dashboard ZERO does not change these points.
— lb
Signal: — mV
SETTLING OK
Method--
Points in use--
Slope--
Intercept--
Last calibration--
How to calibrate
  1. Start empty — remove all weight from the scale.
  2. Add the 0 lb point — type 0, wait for STABLE, then ADD POINT.
  3. Add known weights — put a known weight on, wait for STABLE, type the weight, ADD POINT.
  4. Repeat — 3 to 5 points across the working range give the best accuracy.
Add calibration point
Saves the current signal. OVERWRITE replaces a point at the same weight; AVERAGE blends it with the latest saved point at that weight (asks first).
Saved calibration points
9
#WeightSignal (mV)Saved (UTC)
1 3.0 lb 5.644000 16:53:33
2 25.0 lb 5.840429 16:53:33
3 50.0 lb 6.063643 16:53:33
4 100.0 lb 6.510071 16:53:33
5 150.0 lb 6.956500 16:53:33
6 200.0 lb 7.402929 16:53:33
7 250.0 lb 7.849357 16:53:33
8 300.0 lb 8.295786 16:53:33
9 335.0 lb 8.608286 16:53:33
PLC output mapping
Analog match points, nudge and output arm drive the live 0–10 V signal — they stay on the classic Calibration Hub.
Open classic Calibration Hub